Gear couplings

Муфта зубчатая вид сбоку Gear clutches are intended for torque transmission between a drive and a servo actuator of a machine. The clutches are used in process equipment in different branches of industries.

Gear clutch tooth shape is patented and meets all international standards. Tooth surface is heat-treated.

It is possible to design and manufacture special gear clutches with torque up to 1000.000 H m (up to 100 Tn m) on demand.

Gear clutch production is certified to BS EN ISO 9001:200 (certificate № FM 90597).

Gear clutches, type 1 № 1-8 GOST 50895-96

Муфта зубчатая Муфта зубчатая тип 1 №1-8 (рис.1)

Gear clutch reference code	d; mm from… up to	d1; mm from… up to	L , mm	D, mm	D1, mm	D2, mm	С, no less than	Nominal torque, кНм, up to	Weight, kg	Rotational speed r/s	Dynamic moment, kg m²
Clutch 1-1600 (М3-1)	18…42	22 …38	115	160	110	55	12	1,6	9,2	385	0,02
Clutch 2-2500 (М3-2)	30…50	40…55	145	182	130	70	12	2,5	11,2	314	0,04
Clutch 1-6300 (М3-3)	40…65	40…55	175	220	160	90	18	6,3	21,8	252	0,10
Clutch 1-10000 (М3-4)	45…80	60…75	215	250	185	110	25	10	32,7	210	0,20
Clutch 1-16000 (М3-5)	50…90	80…95	240	280	210	130	25	16	47	178	0,38
Clutch 1-25000 (М3-6)	60…100	80…95	260	310	240	140	30	25	67	157	0,64
Clutch 1-40000 (М3-7)	70…125	100…125	290	350	272	170	30	40	91	134	1,04
Clutch 1-63000 (М3-8)	80…140	-	330	380	300	190	40	63	120	120	1,60

Clutch reference code example: type 1, nominal torque 6300 N.m, bush 50 mounting bore diameter, version 1,45 version 2, environmental version J, category 2 - Clutch 1-6300-50-1-45-2 У2

Gear clutches, type 3 № 1-8 GOST 50895-96

Gear clutch reference code	d; mm from… up to	l , mm	D, mm	e, mm	Nominal torque, кНм, up to	Rotational speed r/s	Weight, kg	Dynamic moment, kg m²
Clutch 1-1600 (М3-1)	18…40	55	110	5	1,6	385	4,5	0,004
Clutch 2-2500 (М3-2)	30…50	70	130		2,5	314	5,6	0,010
Clutch 1-6300 (М3-3)	40…65	85	160		6,3	252	13,3	0,025
Clutch 1-10000 (М3-4)	45…80	105	185		10	210	22,2	0,080
Clutch 1-16000 (М3-5)	50…90	115	210	10	16	175	29,7	0,150
Clutch 1-25000 (М3-6)	60…105	125	240		25	157	45,8	0,300
Clutch 1-40000 (М3-7)	70…120	140	272		40	134	61,4	0,480
Clutch 1-63000 (М3-8)	80…140	160	300		63	120	84	0,780

Clutch pivot joints, type 2 № 1-8 GOST 50895-96

Муфта зубчатая Тип 2 №1-8

Gear clutch reference code	d; mm (limit deviation according to Н7) от… до	d1; mm (limit deviation according to Н9) от… до	d2; mm (limit deviation according to Н7) от… до	l , mm	D, mm	e, mm	Nominal torque, кНм, up to	Rotational speed r/s	Dynamic moment, kg m²
Clutch 1-1600 (М3-1)	24…55	25…55	20, 30, 40	55	160	5	1,6	385	0,02
Clutch 2-2500 (М3-2)	30…75	40…75	30, 40, 50	70	182		2,5	314	0,04
Clutch 1-6300 (М3-3)	40…90	40…75	40, 50, 60	85	220		6,3	252	0,09
Clutch 1-10000 (М3-4)	45…100	60…95	45, 60, 75	105	250		10	210	0,17
Clutch 1-16000 (М3-5)	50…120	80…125	50, 70, 90	115	280	10	16	178	0,35
Clutch 1-25000 (М3-6)	60…130	80…125	60, 80, 100	125	310		25	157	0,57
Clutch 1-40000 (М3-7)	70…150	100…150	70, 100, 120	140	350		40	134	0,91
Clutch 1-63000 (М3-8)	80…170	130…170	80, 110, 140	160	380		63	120	0,50

Clutch pivot joint reference code example: type 2, bush 50 mounting bore diameter and half-clutch 60 - Clutch pivot joint 2-6300-50-50-1 У2.

Gear clutch, type 1 № 9-19

Clutch number	d, mm from…up to	D, mm	D1, mm	D2, mm	L, mm	l, mm	C, mm	C1, mm	B, mm	e, min	Max RPM	Nominal torque, кНм, up to
МЗ-9	100…160	335	430	210	332	165	5	30	50	40	1050	3
МЗ-10	120…180	395	490	260	360	180	5	35	50	40	850	5
МЗ-11	140…210	450	545	300	392	200	5	35	60	40	750	7,1
МЗ-12	160…240	495	590	340	472	240	5	40	60	40	665	10
МЗ-13	180…270	555	680	380	516	260	7,5	45	70	50	600	15
МЗ-14	200…300	610	730	420	562	280	7,5	50	70	50	530	20
МЗ-15	220…340	660	780	450	640	320	7,5	50	70	50	500	25
МЗ-16	240…380	755	900	530	700	350	10	-	90	50	430	37,5
МЗ-17	270…450	855	1000	600	800	400	10	-	90	50	375	56
МЗ-18	340…500	950	1100	670	910	450	15	-	110	60	330	75
МЗ-19	380…550	1050	1250	750	1090	485	15	-	110	60	300	100

Clutch reference code example: clutch М39 with bush 100 and 120 mounting bore diameter - М 39-100-120.

Gear clutch, type 2 № 9-19

Clutch number	d, mm from…up to	d1, mm from…up to	D, mm	D1, mm	D2, mm	D3, mm		L, mm	l, mm	C, mm	B, mm	e, mm	Max RPM	Nominal torque, кНм, up to
МЗ-9	100…160	100…190	335	430	210	280		331	165	10	50	40	1050	3
МЗ-10	120…180	120…210	395	490	260	320		366	180	10	50	40	850	5
МЗ-11	140…210	140…240	450	545	300	380		405	200	10	60	40	750	7,1
МЗ-12	160…240	160…280	495	590	340	420		485	240	10	60	40	665	10
МЗ-13	180…270	180…300	555	680	380	480		524	260	15	70	50	600	15
МЗ-14	200…300	200…340	610	730	420		520	561	280	15	70	60	530	20
МЗ-15	220…340	220…360	660	780	450		560	644	320	15	70	50	500	25
МЗ-16	240…380	240…430	755	900	530		650	708	350	20	90	50	430	37,5
МЗ-17	270…450	270…500	855	1000	600		750	805	400	20	90	50	375	56
МЗ-18	340…500	340…550	950	1100	670		820	910	450	30	110	60	330	75
МЗ-19	380…500	380…620	1050	1250	750		920	975	485	30	110	60	300	100

Clutch reference code example: clutch with intermediate shaft and bores in bush 100 and half clutches 140 and 180 – Clutch М3П9-100-140-180.

It is possible to produce gear clutches according to GOST 5006-83 and TU 24.012309-84.

Разработка сайта:
Мультимедиа -
компания «КСК»