Gear spindles

Gear spindles are characterized by long life due to following parameters:

Order

· cartridge and becket gearing position in working roll paddle zone.

· use of spherical joints centering, excluding transmit of radial load to gearings.

· use of new combining construction of gear joint, excluding water and calx inside the joint and providing lubrication in joint.

					Sizes, mm
Type size	Max. torque, N m	Rotation frequency with working pressure, t/min.	Max. angle of bush warp in ring from axial position		A		D	L	E	D H11	B H11	d1 H7
			Less load	Working load	From	to
Ш3-1	1000	3500	3*30’	1*	500	1600	205	75	50	90	70	90;100
Ш3-2	10000	1500	3*30’	2*	630	2800	240	105	50	120	90	90;120
Ш3-3	15000	1500	3*30’	2*	800	2000	282	125	50	140	110	130;140
Ш3-4	40000	1000	3*30’	2*	1000	3150	328	130	50	170	130	160;170
Ш3-5	75000	700	3*30’	2*	1180	3750	380	155	70	190	150	190;200
Ш3-6	106000	500	3*30’	2*	1180	4000	420	170	70	220…230	170	220;230
Ш3-7	125000	300	3*30’	2*	1320	3750	470	180	80	240	200	220…240
Ш3-8	250000	165	3*30’	2*	1500	5000	570	215	90	300	240	300

Example of reference designation of gear spindle of type size 2 with inter joint distance A=630 mm Spindle Ш3-2-630.

All spindles not included in standard range, can be produced on special drawings.

Order

The company's managers are always glad to answer your questions, perfrom a calculation of the service costs and prepare an individual commercial offer.

Back