Single stage and double stage kinematic cilindrical gearboxes

Single stage (РЦО-63) and double stage (РЦД-126) kinematic cylindrical gearboxes are used in general purpose drives where automation devices can be applied.
The gearboxes are intended for increasing and decreasing of an output shaft rotating speed.

The gearboxes have the following features:

-        oil bathe non-circulating lubricating system;

-        cylindrical input and output shafts.

The gearboxes operate under the following conditions:

-        permanent, oscillating, one direction and reversal load;

-        shafts rotation in any direction;

-        ambient temperature is from – 40°C to + 50°C;

-        non-aggressive medium, average dust content and humidity.

Upon Customer request EZTM JSC designs and manufactures special gears and gearboxes.

Gearbox standard size

РЦО-63

РЦД-126

Nominal transmission ratio, Uн

1,10; 1,111; 1,125; 1,143; 1,20; 1,250; 1,333; 1,40; 1,440; 1,50; 1,563; 1,60; 1,667; 1,750; 1,80; 1,929; 2,0; 2,154; 2,160; 2,167; 2,263; 2,333; 2,50; 2,60; 2,667; 2,750; 2,833; 2,917; 3,0; 3,143; 3,20; 3,333; 3,438; 3,50; 3,667; 3,750; 3,790; 3,895; 4,0; 4,50; 5,0; 5,250; 5,333; 5,462; 5,60; 5,667; 6,0; 6,353; 6,750; 6.875

7,1128; 7,50; 8,0; 8,4999; 9,0; 9,4738; 10,0; 10,6249; 11,20; 11,7855; 12,50; 13,2221; 14,0; 15,0; 16,0; 17,0528; 18,0; 18,9475; 20,0; 21,2212; 22,40; 23,6250; 25,0; 26,6665; 28,0; 30,0; 31,50; 33,60; 36,0

Max torque, Н·м,

20

20

High-speed shaft rotating speed, rpm

100

750

Dimensions, mm

length (L)

200

260

width (В)*

115

155

height (Н)

142

142

Input and output shafts dimensions

Ø14n6, L=25

Ø14n6, L=25

Alternative assembly

12, 21

12, 21

Max weight, kg

9,62

15,5

Note: * gearbox base width

The company's managers are always glad to answer your questions, perfrom a calculation of the service costs and prepare an individual commercial offer.
Back